What this solves
Get aluminum entrance door installation planned around the opening, finish, and property type.
Aluminum entrance doors take more abuse than residential units — daily foot traffic, delivery carts, and tenants propping doors open wear hinges and closers fast. A door spec that works for a single-family entry fails at a multi-family lobby or office suite. Hardware mismatch with the frame manufacturer causes callbacks before the first lease renewal.
Not sure what fits?
Send the project details and attachments.
Tell us the city, property type, opening, and service you have in mind. A few details make it easier to point you toward the right glass, door, railing, siding, skylight, or custom glass path.
At a glance
Aluminum entrance doors Sacramento at a glance
Aluminum entrance doors Sacramento firms use must fit the opening, traffic, and job. An aluminum entrance door is a glass-and-metal door set built for busy commercial entries. It fits retail, office, lobby, and shared-building doors. We first ask how people use the door at peak times. Then we check the active leaf, sill, head, and frame. Consider a truck path. It may need a new door and closer. Will the old frame stay? However, a sound frame can keep the job to the door. We measured rough openings twice before we sent a recent order. In our experience, close pivot and lock photos stop wrong parts. In fact, those checks keep the shop list clear. Therefore, they help you plan cost and work time. Start with the door installation service hub to sort the entry type first.
Frame and door match
What must match a new door to its frame?
A new door must match the frame, glass pocket, finish, and lock or closer prep. Door stile is the metal bar on each door edge. Its width sets the glass size and the parts that fit. We check the frame shape, sill, head, swing, and lock edge before we order. In fact, a narrow stile keeps more glass in view. However, a wide stile can take a new lock or closer. We found that two like doors may use different pivots. In fact, a close photo of each pivot can settle that point early. Does the frame still have a sound sill and head? If not, the job may need more than a new door leaf. Send those photos with your quote request. We can then match parts to your opening.
ADA and hardware
How do ADA details shape a commercial entry?
ADA details shape the entry before you order a lock, closer, or panic bar. Clear path is a way to and through an entry for all people. The ADA Standards for Accessible Design guide that review. We check the active leaf, path, sill, closer action, and hardware use. In fact, a door can look right on a plan but fail at the floor. Panic hardware may suit an exit path. A card reader may need lock and power prep instead. We found that early hardware notes stop shop changes. That said, site use and local review set the final code path. Is this door on the public route? Put that fact in the quote before the door reaches the shop.
Glass and safety
Which glass belongs in a metal entry door?
Door glass must fit the opening and the chance of human impact. Safety glazing is glass for spots where people may hit a door lite or nearby panel. The California Building Code safety-glazing rules guide that check. Tempered glass often fits door lites and nearby impact glass. Layered glass may fit where glass must stay in place after a break. In addition, the CPSC glass safety rule supports that review. In fact, we check lite size, frame pocket, glass bite, stops, and seal before we order. Consider a deep pocket. It may need a new glass build. In fact, we check setting blocks and part space. This ties the glass choice to the full door system, not just the view.
Closers and thresholds
What closer and threshold specs suit a busy entry?
The door closer and threshold set how the entry opens and how water stays out. A door closer is the arm that pulls a leaf shut at a set speed after each use. We check the closer specification, arm type, and mounting before we order, because a busy lobby wears a light closer fast. In fact, the ADA Standards for Accessible Design cap the opening force on an interior door, so we size the closer to that accessibility requirement. A threshold is the metal sill strip that seals the gap under a door. We measured the floor height on each side before we set the sill, since a tall lip can obstruct a delivery cart or block a wheelchair. Specifically, we match the weatherstripping, seal, and sill profile to daily traffic and exposure conditions. As a result, the door stays easy to open, sheds water, and meets the access path. Send closer and floor photos with your quote so we plan the sill right.
Choose the right path
Which door service fits your opening?
Use this page for a work or shared-building entry that needs a door, glass, and access review. Which part drives the job? For example, choose commercial storefront door installation when the leaf, pivots, closer, or exit hardware drive the work. Choose entry door installation for a home or office swing door without a metal door set. In contrast, a broken lite in a sound door may need storefront glass repair. From our work, we found that wide and close photos make the choice clear. We scope the work to the failed part and how the entry gets used. Before you reach out, gather full inside and outside photos, Close photos of pivots and locks, Rough width and height, The site city and traffic notes, Any closer, panic bar, or card reader. Then send them through our contact page and we will map the right path.
What to expect
What to confirm before aluminum entrance door installation starts.
Capital Glazing scopes aluminum entrance door installs by opening size, traffic level, ADA requirements, and how the door ties into surrounding storefront or curtain wall framing. We confirm tempered or laminated lite spec, closer type, and lock hardware before fabrication.
Related services
Which related door or storefront path fits your job?
Choose the service by the part that drives the job. A door leaf, pivot, closer, or exit-hardware change in a retail glass wall fits commercial storefront door installation. A new frame and fixed glass system fits commercial storefront glass installation. In other words, this page fits a metal entry that needs a door, glass, and access review. Learn about Capital Glazing and check CSLB #1115205. Then call (916) 720-9009 or send photos and opening details through the quote form.
Reviewed by Yuliya Dereviaga, Project Manager
FAQ
Questions people ask before calling.
What is the difference between narrow-stile and medium-stile doors?
Narrow-stile doors use slim metal edges and show more glass. Medium-stile doors use wide edges for a large leaf or new hardware. In fact, we match the stile to the frame, traffic, and hardware plan.
Do metal entry doors need ADA-compliant hardware?
A public entry often needs a lever handle, a sized closer, and a low threshold that keep the door easy to open along the access path. We review the active leaf, sill, closer force, and job needs before we choose hardware. In fact, site use and local review set the final rules.
Can you match a new metal entry door to an existing storefront?
Yes, when the frame and nearby system are sound and can take a matching door. We check the frame series, stile, finish, pivots, glass pocket, and sill before we order. However, a bent or worn frame may need a wider storefront job.
What glass type do these doors use?
Door lites often use tempered safety glass where impact safety applies. In fact, layered glass may fit where glass must stay in place after a break. We confirm the glass type from the opening, frame system, and job rules.
What should I send for a metal entry door quote?
Send full inside and outside photos, close hardware views, rough width and height, and the property city. In addition, note traffic, access needs, and any closer, panic bar, card reader, or floor pivot. We confirm final field size before fabrication.
Next step
Need glass, storefront, door, railing, siding, skylight, or custom glass work?
Call Capital Glazing or send project details through the quote request form. Include the property city, service type, opening details, and attachments if available.